CARLO GAVAZZI EN61036 Uživatelský manuál stáhnout pdf (Strana 38)

▲

Technical features

5A connections

34 40

- one alarm output and one pulse output (kWh or kvarh)

- one output remotely controlled by means of the serial com-

munication and one pulse output (kWh or kvarh)

Pulse outputs: number of outputs: 2; number of pulses from

0.01 to 100 pulses programmable depending on the selected

CT and VT ratio.

Type: open collector (NPN transistor); V

1.2 VDC max.

100mA; V

OFF

30 VDC max.

Pulse duration: 220 ms (ON); ≥ 220 ms (OFF), according to

DIN43864.

Insulation: by means of optocouplers, 2000Vrms between

outputs and measuring input, 2000 Vrms between output and

power supply input; insulation between the two outputs: func-

tional.

Alarm output

Number of outputs: 1

Alarm type: maximum or minimum, phase asymmetry, phase loss.

Set-point: can be modified from 0 to 100% of the electrical scale.

Hysteresis: can be modified from 0 to 100% of the electrical scale.

Activation time delay: programmable from 0 to 255 sec.

Response time: system variables V, W, VA, var, cosϕ (PF), FFT

off, filter off: 700ms; FFT on, filter on: 1.2s;

THD-V, THD-A vari-

ables, Filter off: 3s;

Type: open collector (NPN transistor);

1.2 VDC / max. 100 mA; V

OFF

30 VDC max.

Insulation: by means of optocouplers, 2000 Vrms

between output and measuring input, 2000 Vrms between

output and power supply input; insulation between the two

outputs: functional.

■

Software functions

Password: numerical code of max 3 digits; 2 protection lev-

els of the programming data: 1st level:

Password = “0”, no protection; 2nd level: Password from 1 to

1000, all data are protected.

General features

1 2 ... 33 34 35 36 37 38 39 40

Komentáře k této Příručce

Žádné komentáře

CARLO GAVAZZI EN61036 Uživatelský manuál Strana 38

Komentáře k této Příručce

Související produkty a manuály pro Měření, testování a kontrola CARLO GAVAZZI EN61036