CARLO GAVAZZI EN61036 Provozní pokyny stáhnout pdf (Strana 8)

ENGLISH

Screwdriver

PRELIMINARY OPERATIONS

Before supplying the instrument, make sure that the power supply

voltage corresponds to what is indicated on the lateral label of the

relevant module. For example:

AP1020

Universal power supply

input range: 100V...240V DC/AC (50Hz to 60Hz)

power consumption: 12W / 30VA 1 PHASE

serial number: S/N 002700/20345

Preliminary operations

The various modules (input, output and power supply) have been

conceived to be mounted in the proper slots. To know in which slot

every module is to be mounted, refer to the drawings on the previous

page.

For a correct mounting of the instrument, insert the modules in the

relevant slots, then, at the end, enter the central module, which can be

a blind type or an RS232 communication module; the central module

will help fixing also the other modules in the relevant slots.

To remove the modules, use a screwdriver:

A) gently depress the two fixing tabs (points "1" and "4"

in the drawing on the following page),

B) extract the central module,

C) remove also the other modules.

NOTE: any slot which has not been used must be filled with the blind

plug modules.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 17 18

Žádné komentáře

CARLO GAVAZZI EN61036 Provozní pokyny Strana 8